The Solar powered Planar Array Self-luminous Traffic Sign is a new innovation of the traffic safety industry. it combines micro-level reflective materials, solar energy, Circuit voltage drop technique, light control technology, LED photoelectric technology and Internet of Things application technology. It is a powerful upgrade of road traffic safety management level!
According to the different traffic situations, our Solar Powered Planar Array Self-luminous Traffic Sign designed into two different modes. One is Full-reflective Self-luminous Traffic Sign, the other is Transflective Self-luminous Traffic Sign.
Full-reflective Self-luminous Traffic Sign: The whole signboard (the bottom plate , the text , the pattern and the frame) can emit light. Usually used as small traffic signs .Such as speed-limited signs, prohibitory signs and Safety signs for road construction,etc.
Transflective Self-luminous Traffic Sign: Part fo the signboard (the text and frame and pattern can emit light, the bottom plate don't). In this way , it can maxmumly show the text infos. Usually used as huge traffic signs, such as overhead direction road sign.
Product Features
1. Using patented light guiding technology, it converts the SMD LED light bar into planar array light, and forms the warning pattern or guiding text. The light is quite bright but not vertiginous. The visual recognition distance reaches up to 400 meters.
2. Compared to the dot matrix lighting technology, the planar array illuminating sign directly shows the warning pattern or text, rather than destroying the integrity of the pattern or text, thus the signs can be seen much clear and stable.
3. Multiple working modes for all weather. The planar array Self-luminous Traffic Sign still use 3M diamond lever reflective sheeting. which means when there is enough light or during daytime, the traffic sign can work as a normal traffic sign . and when the nightime come or bad weather like rainy, foggy or hazy happen, the traffic sign will start working and give out light.
4.The luminous intensity can be adjusted. Within the built-in CPU, the brightness level of each sign can be adjusted through software to meet special use or save energy. (For example, turn the street sign to the maximum brightness during foggy day, or automatically reduced the brightness after 12 o'clock,etc.
4. Fully applicable to all traffic participants. Traditional reflective film signs can only work when there is sufficient light, which is quite limited and has potential safety hazards (such as traffic accidents caused by high beam lights). But the planar array illuminating sign can actively give out light, not only cars, but also other traffic participants such as motorcycles, pedestrians can also effectively get traffic information. it can greatly improve traffic safety.
5. power supply system. It has a dual modes of main supply and solar power supply. At the same time, it has AC and DC power supply modes. Use solar energy and solar battery in the absence of mains supply, battery are sealed and maintenance-free, no need to refill, working environment -35-45 ° C, service life up to 5 years, small self-discharge, good recovery from deep discharge.When the battery is fully charged, it can ensure 7 days working time days of continuous rain.
6. The size, color, pattern, text and shape can be costomized as your need, pls contact us directly .
Market Common Products Comparison
| | Solar Powered Planar Array Self-luminous Traffic Sign | Traditional Reflective Traffic Sign | LED Traffic Sign |
| Photos | | |
|
| Mode | Working as a normal reflective sign during daytime or under enough light; adjust to intelligent mode when night come or in rainy,foggy, snowy weather . | Depend on natural light or other light source(like high beam). | Good enough but too expensive , not a common product for all traffic situations or economic budget.
|
| Cost | Reasonable cost ,can be used everywhere | Low |
| Users | Allow all traffic users including cars, motors, pedestrations. | Only for cars, other users cannot get infomation without light . |
| Thickness | ONLY 10mm | 3-4mm |
| Intelligent | IoT technology, remote control, wifi,
brightness can be adjust freely,
built-in cyber control system
(above functions are optional ). | no |
| | HIGHY RECOMMEND | | |
| The main technical parameters of Solar Powered Planar Array Self-luminous Traffic Sign |
| Light source material | SMD high color temperature, low power consumption, cold light source SMD LED, composite material light guide plate
|
| Brightness | Luminous brightness ≥ 200cd / m2, the highest is 350cd / m2
|
| Brightness uniformity | The ratio of the brightness of the same color at the measuring point of 150mm is ≤ 1.5:1; the ratio of the maximum brightness to the minimum brightness of the same color on the entire plate surface should be ≤ 4: l
|
Brightness contrast
| White and brown average brightness ratio ≤ 20: l and ≥ 10: 1; white and blue average brightness ratio ≤ 18: 1 and ≥ 5: 1; white and red, green average brightness ratio ≤ l0: 1 And ≥ 4: l
|
Luminance attenuation
| After 9000 hours of service, the system lumen output is ≥80%; the average brightness during the no-fault time rises ≤0.1
|
Dimming mode
| Automatic control: real-time detection of ambient brightness, automatic control signboard brightness, as well as manually dimmed
|
Dimming range
| The light source can be dimmed within the range of 1%-100% luminous flux
|
Light luminousness
| ≥ 98%
|
Power supply mode
| main power / solar power
|
Working voltage
| Primary voltage of commercial power AC220V, secondary voltage DC24V; solar power supply DC12V/24V |
| Working mode | Intermittent luminescence /Continuous luminescence/flash mode |
| Mean time between failures | ≥30000h |
Average service life
| ≥5 years
|
Environmental applicable level
| Class I environment
|
Ingress protection lever
| Level - IP55
|
Operating Temperature
| -35 ° C ~ 55 ° C
|
Visual recognition distance
| Dynamic sight distance ≥ 300m; static sight distance ≥ 400m
|
Reflective sheeting lever
| 3M Diamond grade
or
if your country has specific need,pls send us your design , we can print that model ?
or
we can send the sign with no reflective sheeting and you can apply your own.
|
Frequent asked question
1. Are you trade company or factory?
A: We have our own foreign trading company , domestic trade company and factory , our factory covers an area of 3,000 square meters. We have 10 years of production and construction experience, welcome to visit our factory and company.
2.How about the products quality ?
A: We strictly follow industry standard , after every single order is finished , we will have a paper quality report, and for abroad marcket , we can provide corresponding certification according to your request.
3.How about shippment ?
A: We are factory , everything will strictly follow our contract. Except for disasters that cannot be resisted.
4.What kind of paymeny do you accept?
We accept many kinds of payment , such as L\C, TT, Western Union,Paypal ......
5. Can i get samples?
A: Samples are avaible , pls feel free to contact us and tell us your needs.
Contact us here
Wuhan Qisitong Import and Export Trade Co., Ltd. Tina Fan
Add: No.43(9), Baiquan Maomiaoji Street, Tel: 0086-27-59202311
Dongxihu District, Wuhan,China,430040 0086-13454935781
Company Code: 91420112MA4L0AEF25
Trade Lisence code: 03592629
Customs Code: 42019680AK
